#2? What happened to #1?

Well, I didn’t post for #1. But better late then never, right?

Tonight was class #2 of my silversmithing class at the Art League in Alexandria. We did cuttlefish bone castings, which I have to admit, I wasn’t actually too excited about initially, but now I am SO in love with my piece, I got very excited!

Cuttlefish bones are made up of pretty much just calcium. They are very soft, which makes it easy to carve into it, or press shapes into it. You may have actually seen one – they are good for birds, and are often wired to the side of bird cages for the bird to snack on. We decided on the shape we wanted to cast and then carved/impressed the shape into the soft cuttlefish bone, then fitted another bone over it and cut out a little funnel at the topfor the melted metal to flow into the casting.

Cuttlefish bone also has a natural striation in the material that makes really interesting patterns and textures in the casting.

I decided to make a disc shaped pendant with the spokes of a lego gear emerging out of the disc at an angle. I figured with the wavy striations, it would look like a gear or a snowflake sticking up out of the sand.

You can see the striations quite a bit on the back.

It turned out very well! I wish I had thought to snap a few photos of my carving that I cast the piece from, but I didn’t. After I made my mold, I heated scrap silver in a crucible until it was molten, adding a bit of flux (boric acid I think) to help remove any slag (grossness. and yes, that’s a technical term). Then carefully, but quickly, I poured the molten silver into the void i had carefully carved out.

During the carving, the workshop smelt faintly fishy the whole time, but after pouring hot molten meltal into the bone, there was nothing faint about it. It smelled very badly of nasty burnt fish, blech!

A few students had some bad luck with their molds. Not enough material between the mold and the edge of the bone, and the molten metal would find a way to escape the mold and all was ruined. Once used, the bones could not be used again, as they were burnt to a stinky crisp. I was very happy that my casting turned out wonderfully, much better than I expected.

After retrieving my cooled metal from the quench pot and chucking the stinky remains of the burnt mold, I consulted Nick, our teacher on ways to finish this sucker off. On Nick’s suggestions, I filed the angled gear shape down smooth. This week I will need to decide whether to keep the edges as they are, or perhaps cut away around the edge of the protruding gear and into each little coggy protruberance. I’m not sure which I’ll do.

This photo is it’s current state, after a bit of filing.

Good thing I have a week to think it over!

-Amy

Made this bracelet up over the weekend. It is done in a weave called “Stepping Stones” – very fitting, don’t you think? I tweaked the sizes of the rings to give maximum drama between the “stones” and the smaller rings running around them.

This will be listed in my shop as soon as I can get some good photos taken.

I think when I list it, I will name it, “A River Runs Through It.”

What would you name it? I’d love to hear.

Once again, I am teaching a chainmaille class! The first class did not have enough registrants, so it was cancelled. Woe is me! *sniff sniff* This one is on though! So signup!

If you are in the DC metro area and enjoy wearing gorgeous jewelry, you might be interested in the class I’m teaching in a few weeks!

This is a 4 hour class from 10am-2pm on Saturday, September 12th at The Soundry, a very cool artist space in Vienna, VA. I’m also all set to teach it on October 3rd. (All Saturdays!) All you have to do is bring yourself, and I supply everything else!

 

Many people hear “chain maille” and think medieval armor–not so anymore! With a pair
of pliers in each hand, you will learn the byzantine chain maille weave. It is a lovely, complex
and ornate looking weave, but surprisingly easy to learn! Students will finish an 8 inch sterling
silver bracelet with a toggle clasp that will be the envy of all your Tiffany-shopping friends!
Class Fee: $25, Supply Fee: $55 (may vary depending on cost of silver)
Ages: 12yrs + Experience: Beginner
Sign up now!

 
I am very excited! If you’d like to sign up, just click here for the sign up form. Feel free to drop me note in the comments or email if you like as well, I would be tickled to hear from you!

-amy

It’s funny how one learns things. Sometimes, all it takes to pick up a lot of things is just immersion into the subject. But if one can’t immerse oneself, it’s hard.

I’m just thinking over how my course of jewelry making has taken in the last year. I decided about this time last year, that I was going to make jewelry for the females in my family for Christmas. I hadn’t done any jewelry making since high school, when I would do some stringing on fishing line, and then take a lighter and melt the knot so it wouldn’t SPROING apart. In case you don’t know, this is a pretty juvenile approach to bead stringing, however, it served pretty well, and I had several necklaces for many years before they broke.

So when I first started, I bought a bead stringing book, and some beads during a trip to Michaels. The book was a great start with the introduction of some basic stringing tools – the proper kind of material to string it with, crimping pliers, crimp beads, clasps, design elements. I knew that I couldn’t keep going to Michaels – I was still uneducated, but I knew it was over priced, and cheap. The first site I stumbled on was jewelrysupply.com and while it is a decent site, it’s not one of the better jewelry supply sites that I now know are out there.

So I strung a little and read my book and looked through the site looking through the various tools they had wondering what in the world one would do what THAT. I started scouring etsy for inspiration and also, some direction. Stringing wasn’t really for me, honestly. It was too easy and too hard, all at the same time. Too easy in that all you have to do is slip a bead onto a strand over and over until you have your piece. It’s too hard in that you have to decide WHAT to string and WHERE and in what order and how long and multistrand? and does this stone look good with that one and… It’s harder than it looks.

But I did make jewelry for all the females on my list, and I think back on them and still think they looked pretty good. In the meantime, I had taken a wire working class and learned how to wrap a bead, make some figure 8 connectors, twist wire in new and fun ways. The class was actually kind of an accident, in that if I knew what it was about, I think I would have passed, but in fact, it was exactly what I needed. I took in the language, the terminology of the wire work and yearned for more. I discarded what I didn’t like about the class and honed the skills it taught me.

I found a few of the jewelry supply monoliths out there and again pored over their catalogs and built wishlists. I went to local beadstores and bought way too many beads. (And never too many!) I joined a yahoo group for wire wrapping and continued to track and absorb. I looked through galleries, I knew what I liked, I knew what I didn’t like.

Somewhere in there, I found a few chainmaille sites. This is where I think I may have gone a little haywire. I think chainmaille is fantastic for many reasons – in the right material and sizes, it almost never fails to impress. It’s so intricate and meticulous and yet one can do it while they sit on the couch watching TV. (What’s not to love?) One can adorn it with beading or leave it plain and it still looks jaw-droppingly gorgeous.

I was a smitten kitten. I bought my first (last? I know james hopes so!) jump ring cutter and my love affair with sterling silver was fully underway.

I scoured forums, chainmaille weave tutorials, added super sale dates to my calendar so I could be sure to buy my expensive sterling silver wire at the best price, cursed my jumpringer, smooched my jumpringer, wove and wove some more. I branched back out from time to time, to make some wire wrapped beaded items that I was proud to see had a unique design to it, something I could proudly point to and say, “I designed that.”

Another class, this one on soldering, light up a big compact flourescent bulb over my head. I was on the search again, this time, poring over torches, solder, flux, pickle, and let’s not forget disc cutters, doming blocks, rolling mills, flexshafts. More groups to join, more forms to explore, more words, this time on smithing, to hang on to every one.

There is a great jewelry artist community out there that has given a lot to me (whether they knew it or not) just from my careful observation. Just from my reading every word I could find on the subject. Almost just through my proximity, my hovering around to hear every morsel, every drop. almost, one could say, through osmosis.

Still, I guess there comes a time where even learning through osmosis needs actual instruction. And so I’m very excited and absolutely giddy that I am taking a class in the fall term of the Art League, on silversmithing. Nine glorious weeks of bench time with someone to watch and hang on every word. Though this time, not in virtual space, but in real space.

I start mid September. Very excited.

-amy

We are back from vacation. It was wonderful. My brother is now married. We partied hard with my side of the family. And then we drove from southern Oregon up to Portland, which is right on the border with Washington state. We saw a bit more family, as my aunt is in Vancouver, WA, but mostly, the rest of the trip was our own little family vacation. James and I both got to do our own geeky things – his were comic book shops and beer — LOTS OF BEER. Mine was bead & craft & fabric stores — LOTS OF BEADS AND FABRIC. It’s a good thing we don’t live there or Fabric Depot, The Bead Source, and Umawajirasanakanukiwa alone would bankrupt us.

I REALLY didn’t worry about food while we were there. And so it was no surprise when I was up 5 pounds at weight watchers today. But one thing vacation has done for me, is it has given me lots of MOTIVATION! I am buckling down for an awesome week to get back to where I was. I usually buy breakfast AND lunch, mostly because of lack of preparation, so this week I am going to try to get everything ready to go before hand.

I also am feeling all gung-ho about getting this house clean and decluttered! Our problem is when we clean up we shuttle crap from one surface to another, and so it gets messy again easily. Time to get RID of all the crap, find permanent homes for everything we own, and keep it clean! This will be a long-term project, but as I said, GUNG-HO!

I’ve also kind of been hunting for a new purse for the last few months. I even bought one at JC Penney’s and tried it out at home before I decided it really just wasn’t me. So after buying a big pile of gorgeous fabric in Portland (Fabric Depot is awesome) I think I need to clear off my sewing table in the next month or so and make me a new purse.

I took some rings with me on vacation, but didn’t really do much with them. It was a nice jewelry vacation, really. And I bought a lot of beads while I was there. I tried to envision what I would do with each bead before I bought them, so I am now FULL of ideas.

One reason why I gravitate to chain maille is that there is a pattern to follow and even with no modifications at all, it looks incredible. Sometimes I sit with beads and get the beader’s equivalent of writer’s block. So many different combinations possible! Too stiffling! What if I get it wrong! So being full of ideas is a lovely feeling. On the flip side though, doing ONLY chain maille is stifling too. Some pieces are VERY time consuming, and also it puts all the pieces (except earrings!) in my shop at a fairly high price point.

I want to jump-start all these visions and quell the beader’s block before it begins, so I thought I would do a little challenge for myself. A piece of jewelry a day for a week. This will also help me build up some inventory, which I need, and help build in a better variety of price points on pieces in my shop. I have lots of ideas for earrings, which will make it a fun and easy challenge, not to mention if it will probably get me to actually FINISH a few of the things that are 3/4 of the way to complete! If any jewelry designers out there want to join me, please comment, I’d be just tickled!

I’m also working on another challenge, though this one is not self imposed. I am a member of a wire wrapping group on yahoo, and right now there is a “Big & Gaudy” Earring challenge. The only criteria is that they should be at LEAST 2 inches long. I am having a blast sketching out different possibilities, but the deadline has started to loom, so it’s time to stop sketching and start MAKING! I’ll show those off when the deadline comes as well.

I’m telling you, all this motivation feels AWESOME!

That’s it for now — so nice to be home — so nice to be filled with ENERGY! Hopefully it’ll last!

-amy wonders where the hell ‘gung-ho’ came from. let’s blame canada.

I never did follow up and post how my soldering class went. It went awesome!

Here is a photo I took with my phone halfway through the class. The bracelet is only half done, I just draped it over my wrist.

Here are is a picture I took after I got home. I plopped everything I came home with (finished and unfinished alike) into my light box and took some shots with the Canon 30D.

You can see 2 square links that have not been soldered, one that was soldered, but I didn’t need, a few little bitty clasps I made, and some balled headpins — which I strung a pretty lucite bead on to show how I plan on using them. And then of course, the bracelet I finished in class.

As you can see, when you put the torch to silver, it oxidizes the metal. The oxidation is the black and goldish colors you see in the torched pieces. In order to remove the oxidation, when you’re finished, you place it in the “pickle” a solution that removes a very fine layer of metal, including the oxidation. The finished bracelet went into the pickle at the end of class, thus it’s nice and shiny. It had not yet been tumbled, so the silver is still a kind of matte finish rather than a shiny finish. I have a tumbler at home, so I didn’t worry about tumbling it in class.

And here is my finished bracelet.

When I got home, I added (unsoldered) chainmaille pieces inside each of the square (soldered) links. I absolutely adore it – The organic asymmetrical-ness of the squares makes it looks kind of retro to me. Very mod. I am going to make another one with a little less hammering of the squares…. once I can find a square mandrel to use!! I’ve just been keeping my eyes peeled for anything but I may have to ramp up efforts, head to a hardware store and actually actively look for something.

My pyromaniac sale is over, and I sold 2 items, which in my book, is a SUCCESS! I received my torch and soldering supplies, and let me tell you – it is FUN! I’m hoping to finish some earrings this weekend to list.

Also, I may be teaching a chainmaille class August 1st! I am kind of excited! If you are in the northern VA area and are interested, let me know and I’ll keep you up to date! It will be a byzantine class, and participants will be able to finish this bracelet in class:

-amy

Remember all my swearing and head banging against a wall re: jewelry photography?

Well, I picked up a new macro lens on craigslist Friday evening.

Canon EF 50mm f/2.8 macro. I set up my lightbox, lights and started taking some shots.

I loooooooooooooooooove this macro lens. It is truly, awesome. All my troubles are OVER! Wheeee!

Look at that! I mean, LOOK AT THAT! You can see the grain of the wood! Like, up close! Awesome!

Needless to say, this has made jewelry photography a SNAP.

I mean, damn.

DAMN!

This is for sale, by the way. Right here.

Isn’t it pretty?

-amy stops going crazy with frustration.

ps – sneak peak of a new listing coming soon (click to see larger photo):

I have actually been meaning to post on the old blog-er-oo for a while now. I know! Crazy! I have had things to say that take more than the 140 characters allowed by twitter! I just haven’t had the time to sit down and write. Which is a bogus excuse because I’ve had time enough to play Fallout 3 on the PS3!

Today was Jocelyn’s birthday. I hope it was lovely for her, I think it was. It was not as lovely for James and I.

We planned to do her “party” at her school. Meaning, not really have a party at all, but make a bit more of a fuss than just send in cupcakes. We got party hats for all the kids, enough balloons for everyone in her class (36 kids!!) to take one home, and cake of course.

I was on my way from work when I got a call from Ethan’s school’s vice principal. Something had set him off in his classroom and he wasn’t able to settle down, so his teacher asked the VP to take him out of the classroom. She walked around with him for a bit but he still was giving her attitude. At one point he threw his library books, and finally, she had the Principal come get him, and carry him to the office (because he would not go himself).

Ugh. I mean… UGH. Our first objective was to make sure that Jocelyn’s birthday didn’t get ruined. James picked him up right away (he was planning to get him early anyway so we could all do to Jocelyn’s class) and we didn’t make a fuss about it. We basically didn’t do anything about it, except let him know we would talk about it later.

We got to Jocelyn’s class and she was so excited and happy. Birthdays are her absolutely favorite things EVER 🙂 Everyone was very excited to have cake and see the balloons and sing happy birthday. It was very low key, lower than I had anticipated, really. We sang, served cake, popped party hats on everyone, and after the cake was consumed, everyone went out to play outside. Jocelyn and Ethan went out and ran around on the playground a bit, and then we came home to open presents. We got her a new scooter, a little pink bin of legos, a Barbie mermaid, fairy, and (of course!) a strawberry shortcake doll (Rainbow Sherbet!)

After a few scoots around the driveway on the new scooter, we left and went to Jocelyn’s choice of dinner restaurant: Chuck E. Cheese. That place is so much nicer on a weeknight than it is on a weekend. Wow. The kids ran around and had a ball, eating bites of pizza in between video games and crawling around in the kid-sized gerbil tunnels.[1 Seriously. All they need to add is a big wheel and a water drip and the illusion will be complete.] Home, little more playing, and then bed. We still have a pinata that we will probably gather the neighborhood friends together for tomorrow evening. Overall, a big success, and all without the stress of planning a major party – which I love to do, and usually have fun doing, but still, the stress is there. I’ve had enough stress, thank you. I hope we can do something similar for Ethan’s birthday when it comes up, but I’m not sure what.

So, the birthday girl had a lovely day. James and I were pretty much on edge with that sick feeling one gets when their child is having issues. The Ethan update is pretty much, he’s got issues, man. He had a good spell in January, and DOES seem to be less in trouble for *hurting* others, but his behavior still has the same issues. Impulsive, inattentive, aggressive. The plethora of testing done by the school is complete, and tomorrow we meet with everyone at the school to discuss the results. James and I have the reports already and have read them over, and as far as we can tell, it’s really nothing new. Which I guess is good – no mention of any learning disorders or anything — just the same things that we already know. Hyperactive, short attention, impulsive, little self control… We’ll see what they recommend.

On the shrink front, we had an appointment with a psychiatric nurse practitioner but it got canceled for insurance issues. I called back and went ahead and made an appointment with someone different, a psychiatrist who was recommended by another child psychologist from a practice that doesn’t take our insurance. Our appointment with him is next week.

I’m feeling pretty down, but this is an atypical feeling.. just because his day at school today went so badly. I am usually pretty upbeat.. because I have seen a significant improvement in our interactions with him at home. He is playing with his friends pretty well, which was NOT the case at the beginning of the year. I am feeling down because I feel like we’re a step closer to an ADHD prescription which I really am not ready for. And I am definitely not taking the final step until I *really* feel like I’m ready.

I also feel down because I took the most ridiculous fall down the 3 steps down into the garage pre-party. I mean, RIDICULOUS. I don’t even know HOW I fell. I just went ass over end and I hurt ALL OVER. It doesn’t help that I’m having back issues again, which really sucks. So basically… HOST BODY BROKEN. MUST FIND NEW HOST BODY. (god don’t I wish!)

Ahhh well. In other news, I have become a chainmaille weaving addict. I bought a jump ring cutting system and am impatiently awaiting my latest order of silver wire so I can go crazy with the SILVER chainmaille. In the meantime I have oodles of copper wire and even have a few new things up in my etsy shop, so take a look 🙂 I had my very first silver byzantine bracelet up there, but it was purchased by an old friend from High School who saw it when I posted to facebook! How’s that for a go ’round, I love it! I’ll post more about the jewelry soon. I have LOTS to say, especially about how much jewelry photography can suck it, and how sick I am of taking a photo I think will totally ROCK, get it into photoshop, and it looks shitty. SUCK IT, JEWELRY PHOTOGRAPHY! I used to think I could take a decent picture! No! I can’t! I suck! Ahhh well. I will learn.

I hope!

That’s it for now. Wish us luck for our meeting with the school tomorrow!

-amy hears the whoosh, whoosh, whoosh, of the tumbler, tumbling her newly cut jumprings to a burnished, awesome shine!